Showing 289–304 of 1047 results
-
$11.99 – $21.99Price range: $11.99 through $21.99
Disposable Plastic Lab Syringes, Luer Slip, No Needle, Non-Sterile Single-use polypropylene lab syringes with Luer-slip tip, designed for precise liquid measurement, transfer, and dispensing in laboratory, industrial, and research settings. The transparent PP barrel features clear, bold graduation markings for accurate volume reading. The Luer-slip tip provides friction-fit compatibility with standard blunt-tip dispensing needles, tubing…
-
$64.00 – $84.00Price range: $64.00 through $84.00
Disposable Polypropylene Bouffant Caps, Non-Woven, Lint-Free ZHC LAB’s Disposable Polypropylene Bouffant Caps provide reliable hair and particulate containment for cleanroom, laboratory, food service, medical, and manufacturing environments. Constructed from lightweight, breathable spunbond polypropylene, each cap features a double-stitched covered elastic band for a secure, comfortable fit across a wide range of head sizes. The non-woven,…
-
$168.99 – $239.99Price range: $168.99 through $239.99
DNP Black Tab Sealing Tape Application: Tab Insulation and Sealing for 3C, EV, and HEV Lithium-ion Batteries Product Overview: Manufactured by Dai Nippon Printing (DNP) in Japan, this black sealing tape (Model PPa-N) is engineered for the critical insulation and sealing of battery tabs. It is extensively utilized in the production of cells for consumer…
-
$105.00
The unibody model debuted in October 2008 in 13- and 15-inch variants, with a 17-inch variant added in January 2009. Called the “unibody” model because its case was machined from a single piece of aluminum
-
Double Burette Clamp, Butterfly Style, Spring-Loaded Jaws with Rubber Pads ZHC LAB’s Double Burette Clamp holds two burettes or glass tubes simultaneously on a standard laboratory support rod. The butterfly-style body features two independently spring-loaded jaw assemblies mounted on opposite sides of a central boss, each gripping a separate burette with consistent, even clamping pressure….
-
$199.99
Double-Sided Carbon-Coated 316L Stainless Steel Foil (Aqueous Zinc Battery Grade) Application: Current Collector for Aqueous Zinc Batteries Product Overview: This product serves as a current collector for aqueous zinc battery systems, utilizing a 316L stainless steel substrate double-sidedly coated with carbon. The coating significantly enhances the substrate’s conductivity and surface properties while maintaining the excellent…
-
$199.99
Double-Sided Carbon-Coated Stainless Steel Foil (for Aqueous Zn Batteries) This material is a carbon-coated 316L stainless steel current collector specifically designed for aqueous zinc battery systems. The stainless steel substrate offers excellent mechanical stability and corrosion resistance, while the double-sided carbon coating provides enhanced electrochemical compatibility, improved interface stability, and reduced contact resistance. Custom widths…
-
$159.99
Double-Sided Carbon-Coated Aluminum Foil (Dedicated for Sodium-ion and Aqueous LiFePO4 Systems) Application: Current Collector for Sodium-ion Batteries and Aqueous Lithium Iron Phosphate (LFP) Batteries Product Overview: This carbon-coated aluminum foil is specifically engineered for use in sodium-ion batteries and aqueous lithium iron phosphate systems, serving as a high-performance electrode current collector. Coating Method: Centered Continuous…
-
$99.99
Product: Double-Sided Carbon-Sulfur Composite Cathode Sheet (CF-SHEET) Application: Cathode Material for Lithium-Sulfur (Li-S) Batteries Product Overview: This electrode sheet features a carbon-sulfur composite coated on both sides of an aluminum foil substrate. It offers high electrical conductivity and is specifically designed to mitigate capacity fading and rate capability degradation in Lithium-Sulfur batteries. Dimensions: 50 mm…
-
$89.00
High-quality transparent Indium Tin Oxide (ITO) conductive glass substrates tailored for laboratory applications in electrochemistry, optoelectronics, electrode fabrication, electrodeposition, and solar energy research. Key Specifications: – Substrate Material: Standard Float Glass – Conductive Layer: Indium Tin Oxide (ITO) on both sides – Resistance Options: 7-10 Ω/sq, or 3-5 Ω/sq – Transmittance: ≥ 83% – Thermal…
-
$89.99
Product: Double-Sided Polyimide (PI) Coated PE Separator (High-Temperature Resistant) Application: Separator for High-Safety Lithium-ion Batteries Product Overview: This separator is manufactured by coating polyimide (PI) slurry onto a polyethylene (PE) base film. It exhibits excellent high-temperature thermal dimensional stability (>200deg C) and resistance to hot needle puncture propagation, significantly enhancing the safety of lithium-ion batteries…
-
$225.99
Electrolytic Copper Foil (Lithium Battery Grade) Application: Anode Current Collector and Carrier for Lithium-ion Batteries Product Overview: High-purity electrolytic copper foil designed specifically for lithium-ion batteries. It features a purity of 99.98% with a passivation layer, ensuring excellent conductivity and stability. Custom widths are available upon request. Thickness: 4.5 um Width: 250 mm Purity: >…
-
$278.99
Double-Sided Smooth Copper Foil Application: Anode Current Collector for Lithium-ion Batteries Product Overview: This electrolytic copper foil is specifically designed for lithium-ion battery anodes. It features a high purity of 99.98% with a surface passivation layer, ensuring excellent conductivity and stability. Thickness: 6 um Width: 180 mm Purity: > 99.98% (Typical) Areal Density: 50-55 g/m^2…
-
$169.99 – $242.99Price range: $169.99 through $242.99
Double-Sided Smooth Rolled Copper Foil Application: Electrode Current Collector for Electrochemical Systems, CVD/PVD Substrate, FPC/PCB Product Overview: This rolled copper foil features a double-sided smooth finish and is characterized by excellent ductility, superior bending resistance, and high electrical conductivity. It is suitable for precision electrochemical and electronic applications. Thickness: 25 um (Tolerance: 0-1 um) Purity:…
-
$229.99
Dry Pressing Die / Manual Pellet Press Product Overview: The manufacturer provides various standard size material pressing dies. The die’s outer surface is made of stainless steel for excellent anti-rust performance. The die cavity, gasket, and core rod are made of quenched die steel (HRC60-62), ensuring superior wear resistance and pressure resistance. Custom/Smaller Diameter Options:…
-
$139.99 – $449.99Price range: $139.99 through $449.99
Product: DuPont Nafion 117 Proton Exchange Membrane (PEM) Application: Electrolyte Material for Fuel Cells and Water Electrolysis Product Overview: Nafion 117 is a perfluorosulfonic acid (PFSA) membrane widely used for proton exchange membrane fuel cells (PEMFC) and water electrolysis. It offers high proton conductivity and excellent chemical stability. Key Specifications: Model: Nafion 117 Thickness: 183…
